Horizontal Machining Center

Cart

Technical Parameter

Category	Item	Unit	HCN-50	HCN-63	HCN-80	HCN-100
Control	Controller	–	GOANWIN / MITSUBISHI / FANUC
	Spindle Motor Power	KW	11	15	18.5	18.5
	Three-axis Motor Power	KW	3.0 / 3.0 / 3.0	4.5 / 4.5 / 4.5	4.5 / 4.5 / 4.5	4.5 / 4.5 / 4.5
Stroke	X-axis Travel	mm	1100	1300	1500	1700
	Y-axis Travel	mm	600	800	1000	1030
	Z-axis Travel	mm	600	800	800	1030
	Distance from Spindle Center to Workbench	mm	50-550	15-785	115-1115	10-1040
Three-axis Track	Track Design	–	Three-axis Roller
	Track Width X / Y / Z	mm	45 / 45 / 45	55 / 45 / 45	55 / 45 / 45	45 / 55 / 55
	Number of Sliders X / Y / Z	–	4 / 4 / 4	6 / 8 / 6	6 / 8 / 6	6 / 6 / 6
	Screw Diameter / Pitch	mm	240 / 12	XY: Φ40, Z: Φ50 / 10	Φ50 / 10	Φ50 / 10
	Spindle Style	–	BT40	BT50	BT50	BT50
Spindle	Spindle Diameter	mm	Φ155	155	>190	190
	Main Shaft Transmission Mode Standard Configuration	–	Belt-drive
	Main Shaft Transmission Mode Optional	–	Direct Type
	Spindle Speed Standard Configuration	rpm	8000	8000	6000	6000
	Spindle Speed Optional	rpm	12000	10000	10000	10000
	Spindle Motor Torque	N/m	47	140	140	140
	XYZ Rapid Feed	m/min	20 / 20 / 20	20 / 20 / 20	20 / 20 / 20	20 / 20 / 20
	Minimum Setting Unit for XYZ Axis	mm	0.001	0.001	0.001	0.001
Feed	Min. Dividing Unit of Workbench	°	1
Feed	Feed Rate	m/min	10	10	10	10
Workbench	Workbench Size	mm	500×500	630×630	800×800	1000×1000
	T-shaped Groove Width × Number	mm	5-18-100	5-18-145	5-18-100	7-22-100
	Max. Load	Kg	600	700	1200	3000
Accuracy	Positioning Accuracy JIS6338	mm	±0.005 / 300	±0.005 / 300	±0.005 / 300	±0.005 / 300
Accuracy	Repetitive Accuracy JIS6339	mm	±0.003	±0.003	±0.003	±0.003
Automatic Tool Change System	Tool Magazine Capacity	–	Disk 24T	Disk 24T	Disk 24T	Disk 24T
	Knife Handle Type	–	BT40	BT50	BT50	BT50
	Tool Change Time T-T	sec	Disk 2	Disk 2	Disk 2	Disk 2
	Max. Tool Diameter / Adjacent Tool Diameter	mm	75 / 150	Φ110 / >220	>110 / Φ220	110 / >220
	Max. Tool Length	mm	400	400	400	400
	Max. Tool Weight	Kg	8	18	18	18
Other	Mechanical Net Weight Approximately	Kg	7200	9000	10000	12000
	Cutting Coolant Capacity	L	500	600	600	600
	Lubricating Oil Tank Capacity	L	3	3	3	3
	Electricity Demand	KVA	30	35	40	40
	Pressure Demand of Air Pressure Unit	Bar	6	6	6	6
	External Dimensions L×W×H	mm	2500×2870×2785	3800×3040×2900	4000×3400×2900	4600×3600×3200