High Performance Vertical Machining Center

Cart

High Performance Vertical Machining Center

Fully capped protection: optimized and upgraded to reject oil, water, and debris leakage.

Technical Parameter

Category	Item	Unit	VCE-856	VCE-1167	VCE-1380	VCE-1570
Control	Controller	–	GOANWIN / MITSUBISHI / FANUC
	Spindle Motor Power	KW	7.5	11	11	15
	X/Y/Z-axis Motor Power	KW	2.0 / 2.0 / 2.0B	3.0 / 3.0 / 3.0B	3.0 / 3.0 / 3.0B	4.0 / 4.0 / 4.0B
	Z-axis Counterweight Method Optional	–	Nitrogen	Nitrogen	Heavy Hammer	Nitrogen
Stroke	X-axis Travel	mm	800	1100	1300	1500
	Y-axis Travel	mm	550	600	800	700
	Z-axis Travel	mm	600	700	700	700
	Spindle Nose End to Countertop	mm	120-720	120-820	130-730	150-850
Three-axis Track	Track Design	–	Three-axis Roller / Ball
	Track Width	mm	45 / 45 / 45	45 / 45 / 45	45 / 45 / 45	45 / 45 / 45
	Number of Sliders X/Y/Z	–	4 / 4 / 6	6 / 4 / 6	6 / 4 / 6	6 / 4 / 6
	Screw Diameter / Pitch	mm	40 / 12	40 / 12	40 / 12	45 / 12
	Spindle Style	–	BT40 / BT50	BT40 / BT50	BT40 / BT50	BT40 / BT50
Spindle	Spindle Style Selection	–	BBT40 HSK-A63
	Spindle Diameter	mm	155	155	155	155
	Main Shaft Transmission Mode Standard Configuration	–	Belt-drive
	Main Shaft Transmission Mode Optional	–	Direct Type
	Spindle Speed Standard Configuration	rpm	8000	8000	8000	8000
	Spindle Speed Optional	rpm	Direct Type 12000 / 15000
	From the Center of the Spindle to the Vertical Cylinder Surface	mm	630	690	860	860
	Spindle Motor Torque	N/m	70	70	70	70
	X/Y/Z-axis Rapid Feed	m/min	36 / 36 / 36	24 / 24 / 24	24 / 24 / 24	24 / 24 / 24
Feed	Min. Setting Unit for X/Y/Z-axis	mm	0.001	0.001	0.001	0.001
	Feed Rate	m/min	10	10	10	10
	Workbench Size	mm	1000×550	1200×600	1500×800	1600×700
Workbench	T-shaped Groove Width × Number	mm	5-18-90	5-18-100	5-18-125	5-18-125
Workbench	Max. Load	Kg	600	800	900	900
Accuracy	Positioning Accuracy JIS6338	mm	±0.005 / 300	±0.005 / 300	±0.005 / 300	±0.005 / 300
Accuracy	Repetitive Accuracy JIS6338	mm	±0.003	±0.003	±0.003	±0.003
Automatic Tool Change System	Tool Magazine Capacity	–	Disk 24T	Disk 24T	Disk 24T	Disk 24T
	Tool Handle Type	–	BT40 / BT50	BT40 / BT50	BT40 / BT50	BT40 / BT50
	Tool Change Time T-T	sec	1.8	1.8	1.8	1.8
	Max. Tool Diameter / Adjacent Tool Diameter	mm	75 / 150	75 / 150	75 / 150	75 / 150
	Max. Tool Length	mm	280	280	280	280
	Max. Tool Weight	Kg	8	8	8	8
Other	Net Weight About	Kg	5800	7000	7500	8000
	Cutting Coolant Capacity	L	300	350	350	350
	Lubricating Oil Tank Capacity	L	4	4	4	4
	Power Supply	KVA	25	30	30	30
	Pressure Demand of Air Pressure Unit	Bar	6	6	6	6
	External Dimensions L×W×H	mm	2650×2560×2550	3050×2900×2800	3600×3040×2900	3600×3040×2900